Ricoh CL7000 - Aficio D Color Laser Printer Maintenance Manual page 77

Messages/Second messages
Replace Fuser Oil Unit (Type
G)
Replace Fuser Oil
Unit soon (Type G)
Replace Fusing Unit (Type C)
Replace Waste Toner (Type E) It is time to replace the waste
Reset Cyan Toner Correctly
Reset Develop. Unit Correctly
/Yellow/Magenta Cy-
an/Black
Reset Duplex Unit Correctly
Reset Finisher Correctly
Reset Fuser Oil Unit Correctly The fuser oil unit is not set cor-
Error & Status Messages on the Control Panel
Causes
It is time to replace the fuser
oil unit.
The fuser oil unit should be re-
placed soon.
It is time to replace the fusing
unit.
toner.
The cyan cartridge is not in-
stalled, is installed incorrectly,
or not the right type.
The indicated development
unit(s) is/are not set correctly,
or not set.
The duplex paper feed unit is
not set correctly or not set.
The finisher is not set correct-
ly, or not set.
rectly, or not set.
Solutions
Replace the fuser oil unit.
Depending on your service
contract, contact your sales or
service representative.
See p.7 "Replacing the Fuser
Oil Unit".
Prepare to replace the fuser oil
unit. Depending on your ser-
vice contract, contact your
sales or service representative.
See p.7 "Replacing the Fuser
Oil Unit".
Replace the fusing unit.
Depending on your service
contract, contact your sales or
service representative.
See p.19 "Replacing the Fus-
ing Unit".
Replace the waste toner bottle.
Depending on your service
contract, contact your sales or
service representative.
See p.24 "Replacing the Waste
Toner Bottle".
Install a cyan cartridge suit-
able for the machine.
See "Installing the Toner Car-
tridge", Setup Guide.
Set the indicated development
unit(s) correctly.
See p.15 "Replacing the De-
velopment Unit".
Remove and re-install the du-
plex paper feed unit. If the er-
ror continues, contact your
sales or service representative.
See "Duplex Unit Type 7000",
Setup Guide.
Set the finisher correctly.
See "SR770 (2 Tray Finisher)",
Setup Guide.
Set the fuser oil unit correctly.
See p.7 "Replacing the Fuser
Oil Unit".
4
71