Custom Size - Ricoh CL7000 - Aficio D Color Laser Printer Maintenance Manual

Paper and Other Media
E Press { { { { On Line} } } } .
"Ready " appears on the dis-
play.
Ready
Specifying custom size paper for the
Bypass Tray
3
Important
❒ The paper size selected using the
printer driver overrides that select-
ed using the control panel. You do
not have to make settings using the
control panel if you already made
them using the printer driver.
However, when printing with a
printer driver other than the RPC-
TM
S printer driver, you must make
the settings using the control pan-
el. For details about the printer
driver, see Help.
❒ The printer cannot print from ap-
plications that do not support cus-
tom size paper.
A A A A
Press { { { { Menu} } } } .
On Line Menu
Job Reset Form Feed
"Menu" appears on the display.
58
Escape
#
Enter
Power Error Data In
ZDJS001N
B B B B
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Paper
Input", and then press { { { { Enter #} } } } .
The following message appears on
the display.
Menu:
Paper Input
C C C C
Check "Bypass Size" appears,
and then press { { { { Enter #} } } } .
The following message appears on
the display:
Paper Input:
Bypass Size
D D D D
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Cus-
tom Size", and then press { { { { Enter #} } } } .
The following message appears on
the display:
Bypass Size:

Custom Size

E E E E
Press { { { { U U U U } } } } or { { { { T T T T } } } } to set the horizon-
tal value, and then press { { { { Enter #} } } } .
The following message appears on
the display:
Custom Size:
Vert.
F F F F
Press { { { { U U U U } } } } or { { { { T T T T } } } } to set the vertical
value, and then press { { { { Enter #} } } } .
Custom Size:
Horiz.
After about two seconds, the dis-
play returns to the menu.
297mm
210mm