Replacing The Fusing Unit - Ricoh CL7000 - Aficio D Color Laser Printer Maintenance Manual

Replacing the Fusing Unit

R CAUTION:
• The fusing unit becomes very
hot. When installing a new fuser
oil unit, turn off the printer and
wait about an hour. After that, in-
stall the new fuser unit. Not wait-
ing for the unit to cool could
result in a burn.
• Keep the fuser oil unit away from
flames. There is a risk of fire or
burns.
If "Replace Fusing Unit (Type C)" ap-
pears on the display, replace the fus-
ing unit.
Replace Fusing
Unit (Type C)
A A A A
Turn off the power, and then un-
plug the power cable.
Important
❒ Be sure to wait about an hour to
avoid burns.
B B B B
If the 2 tray finisher is installed,
detach it from the printer.
Reference
p.5 "Detaching the SR770 (2
Tray Finisher)"
C C C C
If the duplex unit is installed,
open the duplex reversal unit.
Reference
p.6 "Opening and Closing the
Duplex Reversal Unit"
Replacing the Fusing Unit
D D D D
If the external tray is attached to
the printer, raise it in the direc-
tion of the arrow (A A A A ), and then re-
move it (B B B B ).
E E E E
Slowly pull out the left cover.
F F F F
Open the upper left cover.
1
ZDJP038J
ZHXH010J
ZHXH020J
19