Display:
1 display-feed flex cable
2 M2.5 x 6-mm screws (6)
3 display-feed flex cable hold-down board
4 pull-tab
6. Remove the two M2.5 x 6-mm screws from the display-feed flex cable hold-
down board.
7. Use the pull-tab to disconnect the display-feed flex cable from its connector on
the system board.
8. Move the display assembly to an upright position and pull it up out of the
computer.
Replacing the Display Latch
file:///F|/Service%20Manuals/Dell/Latitude/d400/display.htm (2 of 4) [2/28/2004 8:06:16 AM]
4911U