Replacing The Display Latch - Dell Latitude C400 Service Manual

Display Assembly and Display Latch : Dell Latitude C400 Service Manual

Replacing the Display Latch

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE: Read
procedure.
To replace the display latch, you must replace the whole bezel.
1. Remove the battery.
2. Remove the hard
3. Open the display 180 degrees, and remove the six rubber screw covers and the six
M2 x 4-mm screws that secure the bezel.
Bezel Removal
1 bezel
file:///F|/Service%20Manuals/Dell/Latitude/c400/display.htm (4 of 5) [2/28/2004 7:51:02 AM]
"Preparing to Work Inside the
drive.
Computer" before performing the following