Display:
Back to Contents Page
Display
Removing the Display Assembly
Replacing the Display Latch
Removing the Display Assembly
CAUTION:
instructions in your System Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
1. Follow the instructions in
the battery and prepare the computer for work.
2. Remove the battery.
3. Remove the
4. Remove the
5. Remove the two M2.5 x 6-mm screws next to each hinge.
file:///F|/Service%20Manuals/Dell/Latitude/d400/display.htm (1 of 4) [2/28/2004 8:06:16 AM]
Before performing the following procedures, read the safety
"Preparing to Work Inside the
hard
drive.
center control
cover.
Computer" to remove