Table of Contents
Advertisement
2. Reconnect the bottom flex-cable connector to the inverter connector.
3. Place the display panel inside the display cover.
4. Replace the eight M2 x 3-mm screws (four on each side) around the display panel.
5. Replace the
display
bezel.
Display Latch
Removing the Display Latch
CAUTION:
Before you perform the following procedures, see the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.
1. Follow the instructions in
"Preparing to Work Inside the
2. Remove the
hinge
cover.
3. Remove the keyboard.
4. Remove the
display.
5. Remove the
display
bezel.
6. Slide the latch to the right and lift up.
7. Remove the spring that attaches the latch to the display panel.
1 spring
2 display latch
Replacing the Display Latch
1. Replace the spring that attaches the latch to the display cover.
2. Align the latch with the display cover and slide the latch to the left to secure it into place.
Computer."
Advertisement
Table of Contents
