Dell d400 - Latitude - Pentium M 1.3 GHz Service Manual page 35

Modem:
1 M2 x 5-mm screw 1428U
2 pull-tab
3 modem cable
3. If a modem is not already installed, go to
remove the existing modem:
a. Remove the M2 x 5-mm screw securing the modem to the system board,
and set it aside.
b. Pull straight up on the attached pull-tab to lift the modem out of its
connector on the system board, and disconnect the modem cable.
4. Connect the modem cable to the modem.
NOTICE: The cable connectors are keyed for correct insertion; do not force the
connections.
5. Align the modem with the screw hole, and press the modem into the connector
on the system board.
file:///F|/Service%20Manuals/Dell/Latitude/d400/modem.htm (2 of 3) [2/28/2004 8:06:12 AM]
step 4. If you are replacing a modem,