Install the Power Cord
1 Make sure the printer is turned off.
2 Plug the power cord supplied with your printer into the
power socket (1).
The outlet voltage must match the voltage marked
on the printer label.
3 Plug the opposite end into a grounded outlet.
Connect To the Computer
✔ The interface cable is not supplied with the printer.
1 Insert the plug into the parallel port on the back of the
printer (1) and secure it with the wire clips (2).
2 If necessary, use the grounding screw suplied with the
printer to attach the frame ground wire to the hole (3) at
the right of the parallel port.
3 Connect the other end of the cable to the computer.
4 Turn the printer on.
Printer Handbook: English
|
11