Load Paper - Oki MICROLINE ML310 Handbook

Load Paper

✔ The maximum usable thickness of multi-part forms is
0.014 inch (0.36 mm).
Set the Printhead Gap Lever
Before you load continuous paper, be sure to set the blue
printhead gap lever (1) as follows:
• position 1 for 1- or 2-part paper
• position 2 for 3- or 4-part paper
• position 3 for 5-part, extra-thick paper.
|
12 Setting Up
Paper Lever Positions
= Continuous Forms
= Single Sheet
Bail Lever Positions
Open Closed