Table of Contents
Advertisement
10 Space the rollers on the paper bail evenly across the
paper, then close the bail lever.
11 Adjust the paper guides on the back of the paper
separator so that they are as close to the edges of the
paper as possible without touching it.
12 Use the platen knob to advance the paper up to the
second sheet, then move the paper up to where you
want the first line of printing to begin (top of form).
The position you have selected will be set
automatically when you turn the printer on.
✔ If the printer is on, press the TOF SET button while
the printer is deselected (SELECT light off) to set
the position as the top of form.
13 Put the access cover back on and press down until it
snaps into place, then replace the acoustic cover.
Loading Single Sheets
✔ If the printer is on and selected (SELECT light on),
press the SELECT button to deselect it.
1 Use the platen knob to remove any continuous forms
paper from the print path.
2 Remove the acoustic cover.
3 Raise the paper separator to the upright position, then
slide the guide (1) to the position marked for single
sheets (2).
Printer Handbook: English
|
19
Advertisement
Table of Contents
