Table of Contents
Advertisement
7 Slide the tractors to align them with the edges of the
paper, then set the paper holes on the tractor pins (1).
Make sure the paper covers the groove on the left side
of the platen, then slide the tractor guide (2) to the
center of the paper.
8 Adjust the tractors so that the paper holes are centered
on the pins, then close the tractor covers.
9 Space the rollers on the paper bail evenly across the
paper, then close the bail lever.
10 Use the platen knob to advance the paper up to the
second sheet, then move the paper up to where you
want the first line of printing to begin (top of form).
The position you have selected will be set
automatically when you turn the printer on.
✔ If the printer is on, press the TOF SET button while
the printer is deselected (SELECT light off) to set
the position as the top of form.
11 Put the access cover back on and press down until it
snaps into place, then replace the acoustic cover.
Printer Handbook: English
|
15
Advertisement
Table of Contents
