Brother CP-2000 User Manual page 26

4. Maintenance
Cleaning the scanner
1
Turn off the printer, unplug the AC adaptor, and then position the
copyboard so that it is either lying on the floor facing up or standing up
mounted on the stand or the wall.
2
Remove the top panel (remove the left panel when the printer is mounted
on the long edge of the copyboard) by removing the three screws on the
end of the unit.
3
Use a soft-bristle brush to gently
clean the areas shaded in the
illustration at the right. Also, clean
out the areas at both ends of the
scanner under the side covers.
c b
4
Slide the panel back onto the end of the copyboard, and then re-attach it
with the three screws.
c b
Adjusting the print contrast
1 Hold down both e and f for three seconds.
2 To make the print contrast lighter, press d.
To make the print contrast darker, press
3
A page is printed with the current contrast setting.
24
Do not exert pressure on the
clear plastic.
Never use chemicals to clean the scanner.
f . F