Brother CP-2000 User Manual page 25

Adjusting the scanner
1
With your hand, lightly scroll the writing surface down approx. 11.8 in. (30
cm), and then clean the writing surface well.
2 Hold down both d and f until the PAPER indicator begins flashing. The
writing surface will scroll to its correct starting position.
3
Wait until the PAPER indicator goes off. If a page is printed with the "ERR =
XX" message, repeat this procedure from step
4
If the problem persists, clean the scanner as explained in Cleaning the
scanner on page 24.
Cleaning the black bar
1
Turn off the printer, unplug the AC adaptor, and then position the
copyboard so that it is standing up mounted on the stand or the wall.
2
Open the paper compartment by pulling up its latch.
3
Using a lint-free cloth that is either dry or lightly moistened with isopropyl
alcohol, gently wipe the black bar while turning the gear at the right.
4. Maintenance
1
.
23