Power Supply - Brother CP-2000 User Manual

3. Operation
4
Tear off the excess paper by holding the
side of the paper and pulling it upward
and across.
c b
Remove the roll of paper before transporting the copyboard, otherwise it may
come unrolled in the printer and cause a paper jam.

Power supply

Follow the precautions below to reduce the risk of electric shock or fire.
a
If the unit will not be used for a long period of time, disconnect the AC adaptor
from the wall outlet.
Do not use the AC adaptor outdoors. It can only be used indoors.
Do not allow any objects to come into contact with the AC adaptor or its cords.
The AC adaptor must not be serviced by the user. If repairs are required, contact
the nearest authorized Brother Service Center or the Brother Service Center
indicated in the warranty documentation.
If the AC adaptor requires cleaning, use only a dry cloth. Never use water or
cleaning fluids, since this is extremely dangerous.
Be careful not to pinch or damage either adaptor cable when folding up the stand
or moving the copyboard.
Use only enclosed AC adaptor. Use of other AC adaptor will void the warranty.
1
Connect the AC cord to the AC adaptor.
2
Connect the AC adaptor cord to the DC jack on the left side of the printer
3
Connect the AC cord to an electrical wall outlet.
4
Set the power supply switch on the left side of the printer to "|" to turn on
the copyboard.
1
18
3
4
2