Statistics; Tamper Detection Settings On The Video Analytics Tab; Figure 4-13 Statistics; Figure 4-14 Tamper Detection Settings On The Video Analytics Tab - Honeywell HNVE1 Reference Manual

Statistics

Tamper Detection Settings on the Video Analytics Tab

Document 800-04195 Rev B
11/09
You can view the received bit rate and frame rate for the current image in real time in the
Web-Client.
Figure 4-13 Statistics
Select Received to receive the bit rate
and frame rates for the current image in
real time. Deselecting the check box
disables the refresh rate (default setting)
The Video Analytics tab enables a user to set the tamper detection threshold settings for
blur, blinding, and scene changes. Each setting has three threshold levels: high (80%),
medium (50%), and low (30%). When these thresholds are exceeded, a message displays
on the video display to indicate that a possible camera tampering has occurred. See
Tamper Detection, page 70
Figure 4-14 Tamper Detection Settings on the Video Analytics Tab
Set the Blur Threshold. Blur can
be affected by elements such as
water, for example.
Set the Blinding Threshold.
Blinding applies to obstacles in
front of the camera lens.
Set the Scene Change
Threshold.
HNVE1 V2.1 1-Channel Encoder Reference Guide
for more information.
Setting
57