Mimic Tours - Honeywell HNVE1 Reference Manual

Mimic Tours

Document 800-04195 Rev B
11/09
In a mimic tour, the dome performs recorded pan, tilt, and zoom commands. You can
configure 16 mimic tours of up to 120 seconds each. For details on configuring a mimic
tour, see Configuring a Mimic Tour
Starting a Mimic Tour
1. Click the Live View tab.
2. Type in a number in the Mimic Tour Details field.
3. Click . The mimic tour starts and the dome performs the saved pan, tilt, and zoom
commands. The tour loops and continues until you break the cycle.
Stopping a Mimic Tour
You can stop a preset tour by:
• Using the PTZ Control
• Selecting another function (for example, starting a Preset Tour)
• Clicking Halt
Deleting a Mimic Tours
You can delete the pan, tilt, and zoom commands saved in a mimic tour.
1. Type in a number for a mimic tour in the Mimic Tour Details field on the PTZ Dome
Setup tab.
2. Click Delete. A message displays indicating which mimic tour has been deleted.
Quick Program Preset Details
In the Quick Program Preset Details field, Guests and the Administrator can program
presets 1-4 without using the PTZ Dome Setup tab (see
Note Any existing saved preset positions are replaced with the new preset.
Configuring new presets overrides/replaces existing saved presets (1-4).
1. Position the PTZ dome as required.
2. Type in a preset number (from 1-4) in the Quick Program Preset Details field.
3. Click Program. The new position is saved to the preset.
HNVE1 V2.1 1-Channel Encoder Reference Guide
on page 66.
page 62).
53