Installing The Honeywell Ip Utility Software; Table 3-3 Items Installed On Your System - Honeywell HNVE1 Reference Manual

Installing the Honeywell IP Utility and Web-Client Software

Installing the Honeywell IP Utility Software

30
Note For optimum system performance, we recommend that you ensure your
system requirements are above these minimum configurations.
Table 3-3 Items Installed On Your System
Item
Honeywell IP Utility software
Bonjour software
Honeywell IP Adapter software
Honeywell ActiveX software
TM
EQUIP Series User Guides
1. Close all other applications that may be open on your computer.
2. Open the Honeywell IP Utility InstallShield Wizard.
Method 1: CD
• Insert the CD into the CD-ROM drive.
Note If InstallShield does not open automatically, navigate to [CD
drive]\Honeywell IP Utility\Honeywell IP Utility Setup.exe. Double-click on
the file to launch the program.
Method 2: Website
a. Navigate to www.honeywellvideo.com.
b. Click Customer Resources
software downloads page.
c. Locate your device in the list (for example, click Network Video Systems for an
HNVE1 encoder).
d. Under Honeywell IP Utility, download, extract and open the Honeywell IP Utility
Set-up.exe icon from where you extracted the file.
3. When the Honeywell IP Utility InstallShield Wizard opens, follow the instructions.
After the installation is complete, a Honeywell IP Utility icon
desktop. Double-click the icon to launch the IP Utility.
Function
To enable use of the Web-Client to configure and
control domes and view live video.
To enable the devices to discover domes on the
network.
Required if a workstation does not have IP Utility
installed but an operator is using the Web-Client.
To enable live streaming of video on the
Web-Client.
To provide detailed information about how to
install and configure your EQUIP Series products.
➤ ➤
Download Center I Agree to reach the
displays on the