Before You Begin Configuring; Logging On And Off The Web-Client - Honeywell HNVE1 Reference Manual

Before You Begin Configuring

Logging On and Off the Web-Client

Document 800-04195 Rev B
11/09
Complete the following sections before configuring your HNVE1 encoder:
• Encoder Installation, page
• Installing the Honeywell IP Utility and Web-Client
This chapter covers:
• Navigating the Web-Client interface and using the controls
• Understanding the Web-Client features and functions
• Using Live View to:
• Move PTZ scan assemblies and control PTZ dome lenses while viewing video
• Run presets and tours that have been configured in the PTZ Dome Setup view
• Run a few customizable presets
• View live video from fixed cameras or PTZ domes
• Compression settings
• Tamper detection
Note Up to six Web-Client users can log on to the Web-Client application at the
same time, in any combination of Administrator and Guest users that totals
six.
There are two ways to open each HNVE1 Web-Client:
• By clicking Launch Browser from the IP Utility interface.
• Directly from Internet Explorer by typing in the URL (the IP address) in the address
bar.
17
Software, page
4
27
41