IBM x3105 - System - 4347 Service Manual page 41

Problem determination and service guide
Hide thumbs Also See for x3105 - System - 4347:
Table of Contents

Advertisement

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, System x3105 Type 4347," on page 53 to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code
Description
1807, 1808
General PCI error occurred.
1962
A hard disk drive does not contain a valid
boot sector.
5962
IDE, CD, or DVD drive configuration error
occurred.
8603
A pointing-device error occurred.
Action
1. Make sure that no devices have been disabled in
the Configuration /Setup Utility program.
2. Reseat the failing adapter.
Note: If an error LED is lit on an adapter, reseat
that adapter first; if no LEDs are lit, reseat each
adapter one at a time, restarting the server each
time to isolate the failing adapter.
3. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. Adapter
b. (Trained service technician only) System
board
1. Make sure that a bootable operating system is
installed.
2. Run the hard disk drive diagnostic tests.
3. Reseat the hard disk drive cable.
4. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. Hard disk drive cable
b. Hard disk drive
c. (Trained service technician only) System
board
1. Run the Configuration/Setup Utility program and
load the default settings (see "Using the
Configuration/Setup Utility program" on page 94).
2. Reseat the CD or DVD drive cable.
3. Replace the following components one at a time,
in the order shown, restarting the server each
time.
a. CD or DVD drive cable
b. CD or DVD drive
c. (Trained service technician only) System
board
1. Reseat the pointing device cable.
2. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. Pointing device
b. (Trained service technician only) System
board
23
Chapter 2. Diagnostics

Advertisement

Table of Contents
loading

This manual is also suitable for:

System x3105 type 4347

Table of Contents