IBM LS20 - BladeCenter - 8850 Service Manual page 96

2. Touch the static-protective package that contains the replacement
3. Center the microprocessor over the microprocessor socket. Align the triangle on
4. Carefully close the lever to secure the microprocessor in the socket.
82
AMD Opteron LS20 Type 8850 for IBM BladeCenter: Problem Determination and Service Guide
microprocessor to any unpainted metal surface on the blade server or any
unpainted metal surface on any other grounded rack component in the rack you
are installing the microprocessor in for at least 2 seconds; then, remove the
microprocessor from the package.
Attention: Do not use excessive force when pressing the microprocessor into
the socket.
the corner of the microprocessor with the triangle on the corner of the socket
and make sure that the pin patterns of the microprocessor and microprocessor
socket match; then, carefully press the microprocessor into the socket.
Microprocessor
Microprocessor-
locking lever
Microprocessor
socket
Attention: Make sure that the microprocessor is oriented and aligned correctly
in the socket before you try to close the lever.
Note: A new microprocessor comes in a kit with a heat sink.
Microprocessor
orientation indicator