IBM LS20 - BladeCenter - 8850 Service Manual page 87

To install a replacement small-form-factor expansion card, complete the
following steps:
1. Install the small-form-factor expansion card, as shown in the following
illustration.
a. Orient the expansion card.
b. Slide the notch in the narrow end of the card into the raised hook on the
tray; then, gently pivot the card into the expansion card connectors.
2. Install the blade server cover (see "Operating the blade server cover" on page
64 for instructions).
3. Install the blade server into the BladeCenter unit. See "Removing and installing
the blade server in a BladeCenter unit" on page 61 for instructions.
Expansion
card
Chapter 4. Removing and replacing blade server components
73