IBM LS20 - BladeCenter - 8850 Service Manual page 39

For ibm bladecenter problem determination and service guide
Hide thumbs Also See for LS20 - BladeCenter - 8850:
Table of Contents

Advertisement

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Type 8850," on page 53 to determine which components are customer
replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code
Description
01295085
ECC-checking hardware test error.
012980xx
Patch code missing.
012981xx
Processor patch (microcode) update failed.
01298200
Processor speed mismatch.
19990301
Hard disk sector error.
19990305
An operating system was not found.
Action
1. (Trained service technician only) Reseat the
microprocessor.
2. Replace the following components one at a time,
in the order shown, restarting the server each
time.
a. (Trained service technician only) System
board assembly
b. (Trained service technician only)
Microprocessor
1. Flash the BIOS code.
2. (Trained service technician only) Reseat
microprocessor x.
3. (Trained service technician only) Replace
microprocessor x.
1. Flash the BIOS code.
2. (Trained service technician only) Reseat
microprocessor x.
3. (Trained service technician only) Replace
microprocessor x.
Make sure that microprocessors 1 and 2 have the
same number of cores, cache size and type, clock
speed, internal and external clock frequencies (see
"Configuration/Setup Utility menu choices" on page
87).
1. Reseat the hard disk drive.
2. Replace the following components one at a time,
in the order shown, restarting the server each
time.
a. Hard disk drive
b. (Trained service technician only) System
board assembly
1. Make sure that a bootable operating system is
installed.
2. Run the Fixed Disk diagnostic test.
3. Reseat the hard disk drive.
4. Replace the following components one at a time,
in the order shown, restarting the server each
time.
a. Hard disk drive
b. (Trained service technician only) System
board assembly
25
Chapter 2. Diagnostics

Advertisement

Table of Contents
loading

This manual is also suitable for:

Amd opteron ls20 type 8850

Table of Contents