Set Date/Time - AT&T CL82309 - DECT 6.0 User Manual

Handset settings
Telephone settings
The answering system announces the day and time of the message prior to
playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day and month are set
automatically with each incoming call. The year must be set so that the day
of the week can be calculated from the caller ID information.

Set date/time

Follow the steps below to set the month, day, year and time.
1. When the handset is in idle mode, press MENU/
menu.
2. Press CID or DIR
then press
MENU
3. Press CID or DIR
correct number using the dial pad, then press
/SELECT to confirm.
MENU
4. Press CID or DIR
correct number using the dial pad, then press
/SELECT to confirm.
MENU
5. Press CID or DIR
correct number using the dial pad, then press
/SELECT to confirm.
MENU
6. Press CID or DIR
correct number using the dial pad, then press
/SELECT to confirm.
MENU
7. Press CID or DIR
correct number using the dial pad, then press
/SELECT to confirm.
MENU
8. Press CID or DIR
press /SELECT to confirm. There is a confirmation tone.
MENU
NOTE: If the clock is not set when a message is recorded, the system announces, "Time
and day not set." before it plays the message.
to scroll to >SET DATE/TIME,
/SELECT.
to select the month, or enter the
to select the day, or enter the
to select the year, or enter the
to select the hour, or enter the
to select the minute, or enter the
to select the AM or PM, then
SELECT
12
to enter the main
?BOT/!TZTUFN
EJSFDUPSZ
?TFU!EBUF0UJNF
DMS!WPJDFNBJM
TFU!EBUF
..0..0..
TFU!UJNF
..;..0..