Answering System; About The Answering System; Answering System And Voicemail; Message Capacity - AT&T CL82309 - DECT 6.0 User Manual

Dect 6.0 cordless telephone/answering system with caller id/call waiting
Hide thumbs Also See for CL82309 - AT&T DECT 6.0:
Table of Contents

Advertisement

Answering system

About the answering system

Answering system and voicemail

Your telephone has both a digital answering system and voicemail indication.
Most telephone companies offer voicemail services (fees may apply). Your
telephone's answering system and voicemail indication are independent
features. Each alerts you to new messages differently. For more information
on the voicemail indicators, see page 13. To listen to your voicemail, you
typically follow the instructions that your voicemail service provider provides.
To listen to messages on your digital answering system, press
PLAY
button on the telephone base.
/STOP
If you subscribe to caller ID/call waiting service through your telephone
service provider, you can use your telephone answering system and voicemail
together. Set your answering system to answer calls at least two rings earlier
than your voicemail is set to answer. For example, set your voicemail to
answer calls after six rings and set your answering system to answer after
four rings.
NOTE: Some voicemail providers may program the delay before answering calls in
seconds instead of rings; in this case, allow six seconds per ring when determining the
appropriate setting. By doing this, if you are on a call, or if the answering system is busy
recording a message and you receive another call, the second caller can leave a
voicemail message.

Message capacity

The answering system can record up to 99 messages, depending on the
length of each message. Individual messages can be up to four minutes, and
the maximum recording time is 14 minutes. The actual recording time
depends on individual message characteristics. Messages remain available for
replay until you delete them.
When there are new messages (including memos) on the answering system,
the number of messages stored flashes in the message counter.
If F is flashing in the message counter, the memory is full. You must delete
some messages before recording new ones.

Turn the answering system on or off at the telephone base

Unless you change it, the answering system is on and ready to record
messages. You can turn the answering system off, but if you do so, the
answering system does not answer calls and record incoming messages.
Press
ANSWER ON/OFF to turn the answering
system on or off. If the answering system is turned on, it
announces "Calls will be answered." If the answering
system is turned off, it announces "Calls will not be
answered."
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl82109Cl82209Cl82359Cl82409Cl82509Cl82609 ... Show all

Table of Contents