Table of Contents
Advertisement
Figure 1. "Configuration summary" window
5. Click Apply; then, click Yes when asked if you want to apply the new
6. Exit from the ServeRAID Manager program and remove the CD from the
7. Restart the server.
Using Custom configuration
To configure your controller manually, select Custom configuration. Using Custom
configuration, you can select which two physical drives you want to configure and
create a hot-spare drive.
Complete the following steps to use Custom configuration:
38
IBM xSeries 236 Type 8841: Installation Guide
configuration. The configuration is saved in the controller and in the physical
drives.
CD-ROM drive.
1. In the ServeRAID Manager tree, click the controller.
2. Click Custom configuration.
3. Click Next. The "Create arrays" window opens.
Advertisement
Table of Contents
