Table of Contents
Advertisement
Microprocessor 2 VRM
Microprocessor
baffle
5. Install the VRM.
6. Install the microprocessor:
a. Touch the static-protective package containing the new microprocessor to
any unpainted metal surface on the server; then, remove the microprocessor
from the package.
b. Rotate the locking lever on the microprocessor socket from its closed and
locked position until it stops or clicks in the fully open position
(approximately 135° angle).
c. Position the microprocessor over the microprocessor socket as shown in the
following illustration. Carefully press the microprocessor into the socket.
Lever closed
Heatsink 2
Microprocessor 2
Microprocessor
release lever
Lever fully
open
Chapter 2. Installing options
15
Advertisement
Table of Contents
