Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
Configuration
Figure 5-2: Advanced Wireless Settings screen AutoCell Setup options
There are two AutoCell configuration setting choices:
•
Enable/disable Auto RF Management: Enabled by default
•
Enable/disable Enhanced RF Security: Disabled by default
Auto RF Management
Note: Channel selection and power management is automatically adjusted by AutoCell
when the Auto RF Management option is enabled.
In this mode, AutoCell APs and clients load-balance traffic across under utilized APs. This mode
avoids interference from neighbors clients and APs and other unexpected sources.
Enhanced RF Security
Note: Broadcast Wireless Network Name (SSID) is automatically turned off when you
select the AutoCell Enhanced RF Security option.
Advanced Configuration
202-10064-02, June 2005
5-3