Connect To The Access Point For Initial Configuration; Connect Over Wifi Using The Netgear Insight App - NETGEAR WAX615 User Manual

Insight Managed WiFi 6 AX3000 Access Point Model WAX615
Connect to the access point for initial
configuration
After you set up the access point, you can use several methods to connect to it for initial
configuration.
You can use the NETGEAR Insight app on an iOS or Android mobile device, or use the
Insight Cloud portal or the local browser UI.
The Insight app and the Insight Cloud portal provide ease of access and let you configure
most features that are available on the access point. The local browser UI lets you
configure all features.
For information about using the Insight app or the Insight Cloud portal, see one of the
following sections:
• Connect over WiFi using the NETGEAR Insight app on page 22
• Connect over the Internet using the NETGEAR Insight Cloud portal on page 24
For information about using the local browser UI, see one of the following sections:
• Connect over WiFi to the local browser UI for initial configuration on page 25
• Connect over the LAN to the local browser UI for initial configuration on page 29
Note: If your network does not include a DHCP server (or a router that functions as a
DHCP server) and you do not perform the initial configuration of the access point as
described in one of these sections, you can connect only five clients to the access point
and the access point can provide an IP address to only five clients. To prevent this
situation, make sure that you perform the initial configuration of the access point.

Connect over WiFi using the NETGEAR Insight app

You can install the NETGEAR Insight app on an iOS or Android mobile device and set
up the access point (and perform many other tasks as well).
Install the Access Point in Your 22 User Manual
Network and Access It for Initial
Configuration