Rear Panel - NETGEAR WG102 - ProSafe Wireless Access Point Reference Manual

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102

Rear Panel

Figure 2-2: WG102 rear panel
Viewed from left to right, the back of the WG102 provides the following:
• Detachable Antenna
The WG102 provides one detachable antenna.
• Ground
The WG102 provides a connector of grounding the unit.
• Restore to Factory Defaults RESET Button
The restore to default button located between the Ethernet RJ-45 connector and the power
socket restores the WG102 to the factory default settings.
• RJ-45 Ethernet LAN/POE Port
Use the WG102 Ethernet RJ-45 port to connect to an Ethernet LAN through a device such as a
hub, switch, router, or Power Over Ethernet (POE) switch.
• Power Socket
This socket connects to the WG102
Introduction
12V DC, 1 A power adapter.
202-10064-02, February 2005
2-7