NETGEAR WG102 - ProSafe Wireless Access Point Reference Manual page 52

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
To configure WPA and WPA2, follow these steps:
Log in at the default LAN address of
1.
admin and default password of password, or using whatever LAN address and password you
have set up.
Click Radius Server Settings in the Security menu.
2.
Figure 3-18: Radius Server Settings menu
Enter the Radius settings.
3.
• Authentication/Access Control Radius Server Configuration: This configuration is
required for authentication using Radius. IP Address, Port No. and Shared Secret is
required for communication with Radius Server. A Secondary Radius Server can be
configured which is used on failure on Primary Radius Server
• IP Address: The IP address of the Radius Server. The default is 0.0.0.0.
• Port Number: Port number of the Radius Server. The default is 1812.
3-30
http://192.168.0.229
202-10064-02, June 2005
with the default user name of
Basic Installation and Configuration