Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
•
Global-key Re-Key Time: Check on this option to enable Re-keying of Global Key. The
Global Key Re-Key can be done based on time interval in seconds or number of packets
exchanged using the global key. The default is 3600 seconds.
•
Update if any station disassociates: Check on this option to refresh global key when any
stations disassociated with wireless Access Point.
•
Accounting Radius Server Configuration: This configuration is required for accounting
using Radius Server. IP Address, Port No. and Shared Secret is required for
communication with Radius Server. A Secondary Radius Server can be configured which
is used on failure on Primary Radius Server.
•
IP Address: The IP address of the Radius Server. The default is 0.0.0.0.
•
Port Number: Port number of the Radius Server. The default is 1813.
•
Shared Secret: This is shared between the Wireless Access Point and the Radius Server
while authenticating the supplicant.
Click Apply to save your settings.
4.
Click WEP/WPA Settings in the Security menu.
5.
Figure 3-13: WEP/WPA Settings menu
Choose WPA with Radius from the list.
6.
Click Apply to save your settings.
7.
3-24
202-10064-02, June 2005
Basic Installation and Configuration