NETGEAR WG102 - ProSafe Wireless Access Point Reference Manual page 43

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
Log in to the WG102 using its default address of
1.
address the unit is currently configured Use the default user name of admin and default
password of password, or whatever LAN address and password you have set up.
Click the WEP/WPA Settings link in the main menu of the WG102.
2.
Figure 3-11: WEP/WPA Settings menu
Choose Open System or Shared Key authentication.
3.
Select encryption strength.
4.
You can manually or automatically program the four data encryption keys. These values must
5.
be identical on all PCs and Access Points in your network.
• Automatic - enter a word or group of printable characters in the Passphrase box and click
the Generate button. The four key boxes will be automatically populated with key values.
• Manual - enter ten hexadecimal digits (any combination of 0-9, a-f, or A-F)
Select which of the four keys will be the default.
See "Overview of WEP Parameters" on page B-5
options, as defined by the IEEE 802.11 wireless communication standard.
Click Apply to save your settings.
6.
Basic Installation and Configuration
http://192.168.0.229
for a full explanation of each of these
202-10064-02, June 2005
or at whatever IP
3-21