KIP 7100 User Manual page 57

4. 1 Cleaning
4. 1. 1 Scanner Unit
It is recommended to clean each Scan Glass, Feeding Rollers and Guide Plates as the scan/copy
image may become defective if these parts are dirty.
1. Turn off KIP 7100.
2. Press the levers (1) up to unlock the Scanner Unit. Open the Scanner Unit.
1
1
3. Wipe each Scan Glass (2), Press Rollers (3) and the inside surface with a soft cloth.
Use equal volume mixture of water and a neutral detergent.
3
2
2 3
NOTE
Do not use organic solvent, glass cleaner and anti-static spray for the cleaning.
4-2 Chapter 4 Maintenance