Stack Jam - KIP 7100 User Manual

3. 1. 5

Stack Jam

1. Remove print(s) on Print Trays.
2. Remove Print Trays (1).
3. Pull up the Engine Unit Open Levers (2) to open the Engine Unit.
2
4. Pull and remove the jammed print to the top.
If you remove the print at this time, just close the Engine Unit.
If the print cannot be removed, see [3.1.4 Fuser Jam] for the later procedure of clearing the
jammed print.
5. See [3.1.4 Fuser Jam] for the later procedure of clearing the jammed print.
2
3-10
1
Chapter 3 Error Correction
1
jammed print