Dehumidifying Roll Media - KIP 7100 User Manual

2. 9

Dehumidifying Roll Media

If the roll paper is extremely humidified, it may cause several kinds of defective print.
Defective prints you will experience most will be "crease of paper" and "loss of image".
Normal Print
Normal Print
If the KIP 7100 is installed in such a condition, it is recommended to use the optional embedded
"Dehumidify Heater".
Turn on the Dehumidify Heater if the room air has too much humidity (65% or higher) to prevent
the above kinds of print defect.
Such problems above may be resolved.
NOTE
KIP 7100 is equipped with the Dehumidify Heater (optional for the US)
If needed, contact the service personnel for detail.
To turn on the Dehumidify Heater, press the H side of the Dehumidify Heater Switch on the rear.
(Press its L side to turn off.)
If the media is humidified;
If the media is humidified;
2-20
Crease of paper
Loss of image
H
L
Chapter 2 Basic Operation