Front View - KIP 7100 User Manual

1. 5 Appearance
1. 5. 1

Front view

7
8
9
No. Name
1 Main Switch
2 Original Guides
3 User Interface
4 Emergent Stop Button
5 Scanner Unit
6 Toner Hatch
(Original Table)
7 Engine Unit Open Lever
8 Bypass Feeder
9 Roll Deck
10 Print Tray
11 Stylus
12 USB Port
5
6
2
Function
You can turn on/off the KIP 7100.
Feed the original under the Scanner Unit along the Original
Guides.
This is a Touch Screen, and many kinds of user operation are
available.
PLEASE DO NOT push the LCD area too strong.
Press this button when you would like to stop copying or
scanning emergently.
Read the original with this unit when you make scan or copy.
Open the Toner Hatch when you replace the Toner Cartridge.
Also put the original here and then feed it into the Scanner Unit
when you make scan or copy.
Pull up these levers when you open the Engine Unit.
Feed a cut sheet paper from the Bypass Feeder.
Roll media can be loaded here.
These trays catch ejected prints.
Use this to press buttons on the touch screen.
PLEASE DO NOT use any other pointed object to tap on the UI.
Your USB flash memory storage can be installed here.
5VDC max.
10
4
1-9
3
2
11
12
7
1
Chapter 1 Before Use