Konica Minolta bizhub PRO 1051 Additional Information page 61

Using Perfect Binder PB-503
– To adjust the trimming width, touch [Cover Trimming Adj.].
Use the screen keypad, [+] and [,], or the control panel keypad to
enter the desired value, then touch [+<->–] to select positive or neg-
ative of the adjustment value.
– To adjust the image position of the cover, touch [Cover Image Shift
Adj.].
Touch [Front] or [Back] to select the printed side, then [Up/Down]
or [Right/Left] to select the direction to be adjusted.
Use the screen keypad, [+] and [,], or the control panel keypad to
enter the desired value, then touch [+<->–] to select positive or neg-
ative of the adjustment value.
– Touch [OK] to complete the setting.
12
Touch [OK] twice to return to the Copy Screen.
The Perfect Bind icon will be displayed in the Output Setting area of the
Copy Screen.
13
Select additional copy conditions, as desired.
– When making double-sided copies, select [1-2] or [2-2].
– If the original count exceeds 100, use Separate Scan mode.
14
Enter the desired print quantity from the control panel keypad.
– Proof copy is recommended before making multiple sets.
– After proof copying, the thickness of body set will be displayed on
the Perfect Binding Screen. Use this information if making any ad-
justment.
bizhub PRO 1200/1200P/1051 Additional Information
4
57