Making Perfect-Bound Booklets (Bizhub Pro 1200/1051) - Konica Minolta bizhub PRO 1051 Additional Information

4
4.4 Making Perfect-Bound Booklets (bizhub PRO 1200/
1051)
Procedure
1
Position the original.
– For the original available in perfect binding, see illustrations on
page 46 to page 47.
2
Load paper for body sets and covers in each tray to be used.
– Load paper for body sets in one of the trays 1 to 8.
When printing on covers, also load cover sheets in one of the trays
1 to 8.
– If cover print is not required, load cover sheets in the cover feeding
tray of perfect binder, PI-PFU trays, or upper/lower tray of post in-
serter on folding unit.
– Custom paper size is to be used as cover. Be sure to check the pre-
cise dimensions in order to specify them during this procedure.
If Cover Trimming is desired, be sure to use the size that secures
3 mm to 40 mm of trimming width.
– While the perfect binder is warming up, the Machine Status Screen
will prompt you the current warmup status of the machine.
48 bizhub PRO 1200/1200P/1051 Additional Information
Using Perfect Binder PB-503