Konica Minolta bizhub PRO 1051 Additional Information page 59

Using Perfect Binder PB-503
For details of finished result with each setting specified, see page 46 to
page 47. The original image to be printed on cover varies depending on
whether the original count is odd or even.
8
Specify the bind direction.
– Touch [Left Bind] or [Right Bind] to select the bind direction.
9
Specify the spine width.
– Touch [Change Set] on the right side of Spine Width (1-30 mm) to
display the Spine Width Screen.
Use the screen keypad, [+] and [,], or the control panel keypad to
enter the desired value, then touch [OK].
– This setting is effective with the Cover Print set to [On].
bizhub PRO 1200/1200P/1051 Additional Information
4
55