Editing Tune Parameters; Parameters - Yamaha 503 Reference Manual

Editing TUNE Parameters

[A]/[B]/ PORTAMENTO
[F]/[G] TIME
[C]/[H] PITCH BEND
RANGE
[D]/[I] OCTAVE
[E]/[J] TUNING
[1 ▲▼]–
TRANSPOSE
[3 ▲▼]
Portamento is a function that creates a smooth transition in pitch from the
first note played on the keyboard to the next. The Portamento Time deter-
mines the pitch transition time. Higher values result in a longer pitch
change time. Setting this to "0" results in no effect. This parameter is
available when the selected keyboard part is set to Mono.
Determines the range of the PITCH BEND for each keyboard part (when
a pedal is assigned to this function;
"12" with each step corresponding to one semitone.
Determines the range of the pitch change in octaves, over two octaves up
or down for each keyboard part.
Determines the pitch of each keyboard part.
Allows you to set transposition for overall sound of the instrument
(MASTER), Song playback (SONG), or the keyboard pitch (KEY-
BOARD), respectively.
page 86). The range is from "0" to
CVP-509/505/503/501 Reference Manual
8
71