Yamaha 503 Reference Manual page 96

2 Metronome
[2 ▲▼]
[3 ▲▼]–
[5 ▲▼]
[6 ▲▼]/
[7 ▲▼]
3 Parameter Lock
This function is used to "lock" specific parameters (effect, split point, etc.) to make them selectable only
via the panel control—in other words, instead of being changed via Registration Memory, One Touch
Setting, Music Finder, or Song and sequence data.
Use the [1 ▲▼]–[7 ▲▼] buttons to select the desired parameter, then lock it with the [8 ▲] (MARK ON)
button.
4 Tap
This allows you to set the drum sound and the velocity which will sound when the Tap function is used.
[2 ▲▼]–
[4 ▲▼]
[5 ▲▼]/
[6 ▲▼]
11
96
CVP-509/505/503/501 Reference Manual
VOLUME Determines the level of the metronome sound.
SOUND Determines which sound is used for the metronome.
BELL OFF ................. Conventional metronome sound, with no bell.
BELL ON................... Conventional metronome sound, with bell.
ENGLISH VOICE...... Count in English
GERMAN VOICE ..... Count in German
JAPANESE VOICE.... Count in Japanese
FRENCH VOICE ....... Count in French
SPANISH VOICE ...... Count in Spanish
TIME SIGNA- Determines the time signature of the metronome sound.
TURE
PERCUSSION Selects the instrument.
VELOCITY Sets the velocity.