Yamaha 503 Reference Manual page 85

LEAD GENDER
DEPTH
LEAD PITCH COR-
RECT
UPPER GENDER
THRESHOLD
LOWER GENDER
THRESHOLD
UPPER GENDER
DEPTH
LOWER GENDER
DEPTH
VIBRATO DEPTH
VIBRATO RATE
VIBRATO DELAY
HARMONY 1/2/3
VOLUME
HARMONY 1/2/3 PAN
HARMONY 1/2/3
DETUNE
PITCH TO NOTE
PITCH TO NOTE
PART
Adjusts the degree of lead vocal gender change. This is available when the
LEAD GENDER TYPE on
value, the more "feminine" the harmony voice becomes. The lower the value,
the more "masculine" the voice.
This parameter is only effective when the LEAD GENDER TYPE on
is set to other than Off. When Smooth or Hard is selected, the pitch of the lead
vocal is shifted in precise semitone steps.
Gender change will occur when the harmony pitch reaches or exceeds the spec-
ified number of semitones above the lead vocal pitch.
Gender change will occur when the harmony pitch reaches or exceeds the spec-
ified number of semitones below the lead vocal pitch.
Adjusts the degree of gender change applied to harmony notes higher than the
UPPER GENDER THRESHOLD. The higher the value, the more "feminine"
the harmony voice becomes. The lower the value, the more "masculine" the
voice.
Adjusts the degree of gender change applied to harmony notes lower than the
LOWER GENDER THRESHOLD. The higher the value, the more "feminine"
the harmony voice becomes. The lower the value, the more "masculine" the
voice.
Sets the depth of vibrato applied to the harmony sound. Also affects the lead
vocal sound when the LEAD GENDER TYPE on
Off.
Sets the speed of the vibrato effect. Also affects the lead vocal sound when the
LEAD GENDER TYPE on
Specifies the length of the delay before the vibrato effect begins when a note is
produced. Higher values result in a longer delay.
Sets the volume of the first (lowest), second, and third (highest) harmony note.
Specifies the stereo (pan) position of the first (lowest), second, and third (high-
est) harmony note.
Random
The stereo position of the sound will change randomly whenever the keyboard
is played. This is effective when the Harmony mode
"VOCODER" or "CHORDAL."
L63>R–C–L<R63
A setting of L63>R pans the sound hard left, while C is at center, and L<R63 is
at hard right.
Detunes the first (lowest), second, and third (highest) harmony note by the
specified number of cents.
When this is set to "ON," you can "play" the Voices of the instrument with
your voice. (The instrument tracks the pitch of your voice and converts it to
note data for the tone generator. Keep in mind, however, that dynamic changes
in your voice do not affect the volume of the tone generator.)
Determines which of the instrument parts will be controlled by the lead vocal
when the PITCH TO NOTE parameter above is "ON."
page 84 is set to other than Off. The higher the
page 84
page 84 is set to other than Off.
(page
CVP-509/505/503/501 Reference Manual
page 84
is set to other than
81) is set to
85
10