Table of Contents
Advertisement
Shutting down and restarting the ISDN gateway
It is sometimes necessary to shut down the ISDN gateway, generally to restart as part of an upgrade
(see
Upgrading the
firmware). You should also shut down the ISDN gateway before intentionally
removing power from the ISDN gateway.
Shutting down the ISDN gateway will disconnect all active calls.
To shut down the ISDN gateway, follow these steps:
1. Go to Settings > Shutdown.
2. Click the Shut down ISDN gateway button.
3. Confirmation of shutdown is required; the button changes to Confirm ISDN gateway
shutdown.
4. Click again to confirm.
5. The ISDN gateway will begin to shut down. The banner at the top of the page will change to
indicate this.
When the shutdown is complete, the button changes to Restart ISDN gateway.
6. Click this button a final time to restart the ISDN gateway.
Cisco TelePresence ISDN Gateways v2.0 Online help (Printable format)
Shutting down and restarting the ISDN gateway
88 of 116
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TELEPRESENCE ISDN GATEWAYS 2.0 and is the answer not in the manual?
Questions and answers