Cisco TELEPRESENCE ISDN GATEWAYS 2.0 Online Help Manual page 22

Action What will happen if this rule is
invoked.
Bandwidth The maximum ISDN bandwidth that
will be used for the call if this rule is
invoked.
Cisco TelePresence ISDN Gateways v2.0 Online help (Printable format)
Displaying and testing the dial plan
Possible actions include:
Reject the call: if this rule is invoked the

call will be terminated and the outgoing
part of the call will not be established
Enter the auto attendant: the call will be

connected to the auto attendant
Enter the auto attendant + TCS-4: the

call will be connected to the auto
attendant and an extension accepted
Call this number "xxx": where xxx

represents what is displayed:
for IP to ISDN calls: a number or
•
a pattern
for ISDN to IP calls: a pattern, a
•
hostname, or an IP address
meaning that "xxx" will be called if this
rule is invoked.
Call with the original called number:

the original called number will be used to
place the outgoing part of the call
Call these numbers: meaning that this is

a video call using N x 64kbps or N x
56kbps (for legacy ISDN endpoints only).
The first two numbers to be called are
listed here; click the dial plan number to
view the complete list of numbers
included in this rule
Call port leased line group: if the **

ERROR ** is using leased line mode, this
action indicates on which port the call will
be made and using which leased line
group
The value will be one of:
•
Telephone: the call will be restricted to
voice-only.
•
<default>: the default maximum
bandwidth setting is used To configure
the default bandwidth go to Home >
Settings > ISDN
•
Number of kbps: the maximum
bandwidth allowed for calls matching this
rule
•
N x 64kbps: the call is a video call using
N x 64kbps (for legacy ISDN endpoints
22 of 116