Making Calls With The Isdn Gateway; Isdn To Ip Calls; Ip To Isdn Calls - Cisco TELEPRESENCE ISDN GATEWAYS 2.0 Online Help Manual

Cisco telepresence isdn gateways v2.0 online help
Table of Contents

Advertisement

Making calls with the ISDN gateway

The ISDN gateway allows:
users with ISDN endpoints to place calls to users with IP endpoints
users with IP endpoints to place calls to users with ISDN endpoints
When configured correctly, the ISDN gateway is transparent to users; they will require minimal assistance
and training to place calls through the ISDN gateway successfully.
One training consideration for users making ISDN calls which is not usually present for IP calls is that of
cost; you may want to educate users that ISDN calls escalate in cost with increased bandwidth and
duration. You may also want to configure the ISDN gateway to limit these values if required. (For more
information, refer to
Understanding the dial
For information about setting up the ISDN gateway, refer to:
the Getting Started Guide.
Getting started with the ISDN gateway
When you have the unit and associated devices (for example, the MCU) correctly configured, with an
appropriate dial plan in place, calls can be placed through the ISDN gateway.

ISDN to IP calls

If you have configured the dial plan as in
phone number of the ISDN gateway will, after the call is completely established, be forwarded to the auto
attendant of the MCU. From here they may use the Far End Camera Controls (FECC) of their endpoint to
navigate the menus and join conferences as normal.

IP to ISDN calls

An IP to ISDN caller needs to know the number of the ISDN user whom they are calling. However, if the
call will be placed via a Cisco TelePresence MCU, the ISDN user's number can be incorporated into the
configured endpoint details stored on the MCU.
You can configure the ISDN gateway to allow calls to a single ISDN number. In this case, a single rule in
the dial plan will suffice, matching all numbers and calling out to a single phone number.
If you want users to be able to call any number, set the ISDN gateway up as a 'H.323 gateway' on your
MCU and direct calls to ISDN numbers via that. Alternatively, if you are using a gatekeeper on your IP
network, you can register a prefix with which users may prefix the ISDN number they want to call (this is
similar to dialing a '9' for an external line on many telephone systems).
Cisco TelePresence ISDN Gateways v2.0 Online help (Printable format)
plan).
Getting started with the ISDN
Making calls with the ISDN gateway
gateway, endpoints calling the
11 of 116

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence isdn gw mse 8321Isdn gw 3241

Table of Contents