Updating Dial Plan Rules - Cisco TELEPRESENCE ISDN GATEWAYS 2.0 Online Help Manual

you cannot connect to when some codecs are enabled (even if the endpoint supports those
codecs). We recommend that you only use these options when you experience a problem.
When you select Custom codec choices, the screen refreshes and you can select the
o
audio, video and H.239 video codecs that are allowed with this dial plan
Safe codec choices only allows G.711 and H.261
o
8. Click Add rule.

Updating dial plan rules

To update an existing dial plan rule:
1. Go to Dial plan and find the rule you want to modify.
2. Click on the number or name of the rule to view its details.
3. Modify the rule details using the information listed above in
4. Click Update rule.
You may wish to create a new rule very similar to an existing rule. To do this, find the existing rule and
click on its name or number to view its details. Press Copy rule to create a new rule, initialized with the
existing parameters, then proceed as normal, pressing Add rule when you have finished
Cisco TelePresence ISDN Gateways v2.0 Online help (Printable format)
Adding and updating dial plan rules in leased line mode
Adding dial plan rules to help you.
32 of 116