Cisco TELEPRESENCE ISDN GATEWAYS 2.0 Online Help Manual page 43

Accept Configures the built-in gatekeeper to reply to
LRQs LRQs from other gatekeepers.
Forward Configures the built-in gatekeeper to send (or not
LRQs for
to send) LRQs regarding unknown IDs to its
unknown
neighbor(s). Choose from the options:
IDs



Accept This setting enables the built-in gatekeeper to
LCFs from
accept LCF message responses from any IP
non-
address.
neighbors
Cisco TelePresence ISDN Gateways v2.0 Online help (Printable format)
Disabled: The ISDN gateway will only
respond to LRQs about IDs registered
with itself. It will not forward LRQs about
IDs that are not registered with itself to
neighboring gatekeepers.
Enabled, using local return address: The
ISDN gateway will put, in the LRQ, its
own address as the return address for
the LCF.
Enabled, using received return address:
The ISDN gateway will put, in the LRQ,
the address of the gatekeeper that
originated the request as the return
address for the LCF. Use this option only
if you are configuring the ISDN gateway
to operate in an environment with a
multiple-level gatekeeper hierarchy. For
example, the 'received address' is
required by the national gatekeepers
connected to the Global Dialing Scheme
(GDS).
Displaying the built-in gatekeeper registration list
neighbor(s) to reply to the original
request.
These requests can come from any
gatekeeper which has the ISDN
gateway's built-in gatekeeper
configured as one of its neighbors.
Unless you have selected to Accept
LRQs, you cannot configure the
ISDN gateway to forward any LRQs.
Enabling using received return
address can be a significant security
risk. Only use this setting with
proper cause.
This setting is for use in
environments with a multiple-level
gatekeeper hierarchy. For example,
this feature is required by the
national gatekeepers connected to
the Global Dialing Scheme (GDS).
Enabling this setting can be a
significant security risk. Only use
this setting with proper cause.
43 of 116