Editing And Clearing Auto-Dial Numbers - Sharp UX-A450 Operation Manual

Editing and clearing auto-dial numbers

If you need to make changes to a previously stored auto-dial number, or clear
a number, follow these steps:
1
FUNCTION
Press
2
Press or
the display.
3
Press once.
4
Select EDIT or CLEAR:
EDIT:
1
If you selected CLEAR, go to Step 8.
5
If you selected EDIT, make the desired changes to the number.
Press
change, and then enter the new digit. The new digit will replace the old
digit.
If you do not wish to change the number, go directly to Step 6.
START/MEMORY
6
Press
7
Make the desired changes to the name.
Press
change, and then press the appropriate number key repeatedly until the
desired letter appears (see Step 5 on page 50). The new letter will replace
the old letter.
If you do not wish to change the name, go directly to Step 8.
once and once.
until the number you wish to edit or clear appears in
CLEAR:
2
or to move the cursor to the digit or digits you wish to
or to move the cursor to the letter or letters you wish to
Sending a Fax by Automatic Dialling
Display:
<NEW NUMBER>
1=EDIT, 2=CLEAR
51