Troubleshooting; Error & Status Messages On The Display Panel - Ricoh 9100DN - Aficio SP B/W Laser Printer Hardware Manual

9. Troubleshooting

Error & Status Messages on the Display Panel
This section describes the main messages that appear on the panel display. If a message that is not described
here, follow its instructions.
Status Messages
Ready
This is the default ready message. The machine is ready for use. No action is required.
Processing...
The machine is printing. Wait a while.
Waiting...
The machine is waiting for the next data to print. Wait a while.
Offline
The machine is offline. To start printing, switch the machine to online by pressing [Offline] on the display
panel.
Warming up...
The machine is preparing the development unit. Wait a while.
Energy Save Mode
In Energy Saver Mode Level 2. No action is required.
Resetting Job...
The machine is resetting the print job. Wait until [Ready] appears on the display panel.
Setting change in process
The machine is changing settings. Wait a while.
Suspending...
All jobs in the machine are suspended. Wait a while.
Hex Dump Mode
In the hex dump mode, the machine receives data in hexadecimal format. Turn off the machine after printing,
and then turn back on.
Message (in alphabetical order)
Add staples
9
95